Always mix epoxy thoroughly to ensure proper curing and performance.

• Follow the correct mix ratio for your system
• Mix slowly to reduce bubbles
• Scrape sides and bottom of container while mixing
• Mix for the recommended time before pouring

Pouring correctly is key to achieving a smooth, clean finish.

• Pour slowly and evenly across the surface
• Do not exceed recommended pour depth
• Use multiple layers if needed for thicker pours
• Allow proper cure time between layers

Air bubbles are common but easy to manage with the right approach.

• Use a torch or heat gun to remove surface bubbles
• Apply heat lightly and evenly
• Avoid overheating the epoxy

Cure time depends on temperature, humidity, and product type.

• Initial set occurs within hours
• Full cure typically takes several days
• Avoid disturbing the surface during curing

Proper prep ensures adhesion and a clean finish.

• Clean and dry all surfaces before pouring
• Remove dust, oil, and debris
• Seal porous materials if needed

If something doesn’t look right, it’s usually fixable.

• Soft or sticky surface → incorrect mix ratio or mixing
• Bubbles → improper mixing or trapped air
• Cloudiness → moisture or contamination