Resin Tips for Beginners: What Not to Do

Resin Tips for Beginners: What Not to Do

Working with epoxy resin can be a deeply rewarding and creative experience. The glossy finishes, vibrant colors, and endless project possibilities make it a favorite among artists, DIYers, and crafters. But if you're just starting out, epoxy can seem a bit intimidating. Don't worry—everyone makes a few mistakes early on! With a little preparation and some guidance, you can avoid the most common beginner pitfalls and enjoy a smooth start with resin art.

This beginner-friendly guide will walk you through what NOT to do when working with resin, based on real experiences. Let’s save you time, materials, and stress—so you can enjoy your first project using Easy Pour Epoxy.

1. Don’t Ignore the Instructions – Read Your Easy Pour Epoxy Guidelines

Not all epoxy resins are created equal. Easy Pour Epoxy, for example, uses a precise 1:1 volume ratio and offers generous working time for beginners.

The number one mistake beginners make is skipping the instructions. Every brand—including Easy Pour Epoxy—comes with specific guidelines. Take a moment to read them carefully before you begin.

📌 Pro Tip: Write down key steps and set timers to help stay on track throughout your resin project.

2. Don’t Skip Proper Preparation Before Your Resin Project

Jumping straight into your project without preparation can lead to sticky, uneven results.

**Essential Prep Steps:**
- Work in a clean, dry space. Dust and moisture interfere with curing.
- Ensure proper ventilation or wear a respirator.
- Use dedicated resin tools (measuring cups, mixing sticks, gloves, and a level surface).

3. Don’t Guess the Measurements – Use Proper Tools

Accurate measurement is crucial. Eyeballing the resin and hardener leads to tacky, uncured messes.

**How to Get It Right:**
- Use marked measuring cups
- Mix a little extra to avoid running out mid-project.

4. Don’t Undermix – Stir Slowly but Thoroughly

Poorly mixed resin causes bubbles, streaks, and incomplete curing.

**Mixing Tips:**
- Stir slowly to minimize air bubbles.
- Scrape the sides and bottom constantly.
- Mix for at least 3–5 minutes until the blend is clear and uniform.
🎯 If it looks cloudy or streaky, keep mixing!

5. Don’t Pour Too Thick – Work in Layers

Thick pours lead to overheating and cracks. Easy Pour Table Top Epoxy is designed for up to 1/8" per layer. Easy Pour Deep Pour Epoxy is designed for up to 2” per layer.

**Layering Tips:**
- Pour in thin layers, allowing each to cure.
- Use a heat gun between layers to release trapped bubbles.
💡 Deeper molds? Build up in multiple pours for flawless results.

6. Don’t Forget to Manage Bubbles – Keep It Crystal Clear

Bubbles are common but avoidable.

**Tips to Remove Bubbles:**
- Use a heat gun or torch after pouring.
- Warm the resin to room temperature before mixing.
- Use a toothpick for small or edge bubbles.
🔥 Easy Pour Epoxy is low-viscosity—perfect for smooth, clear results.

7. Don’t Rush the Curing Process – Patience Pays Off

Moving your resin before it’s cured leads to fingerprints and dents.

**Curing Tips:**
- Let it cure undisturbed for 24–72 hours.
- Avoid applying extra heat unless specified.
- Cover the project to prevent dust.
⏳ Curing time may vary—always follow Easy Pour Epoxy's guidelines.

8. Don’t Be Afraid to Make Mistakes – They’re Part of the Process

Everyone starts somewhere. Don’t let a few bumps stop you from experimenting.

**Key Takeaway:**
Start small. Use beginner-friendly products like Easy Pour Epoxy. Ask questions, practice often, and enjoy the process!

Wrapping It Up

Working with resin doesn’t have to be intimidating. With a little knowledge and patience, you can create stunning pieces from the start.

✔️ Follow the instructions on your Easy Pour Epoxy product.
✔️ Prepare your space and tools carefully.
✔️ Mix and pour mindfully.
✔️ Take your time curing.

At  Easy Pour Epoxy, we believe anyone can become a confident creator with the right tools and support. Explore our beginner-friendly collection today and bring your creative vision to life!